NET/MASTER Messages Manual

NNM0750
Messages
2–148 106159 Tandem Computers Incorporated
NNM0750 NO SECURITY EXIT(S) ARE AVAILABLE
Cause. The NonStop NET/MASTER MS system was being started but could not use
any of the configured security exits; or UMS attempted to access an exit that was
previously running and found that all exits had become unavailable.
Effect. If the error occurs during system initialization, the NonStop NET/MASTER MS
system terminates. If the error occurs while the system is running, all future security
requests are denied. Users who are currently logged on are allowed to continue.
When an attempt to use a security exit fails, message NNM0752 is displayed.
Recovery. If the security exits are defined in the configuration file, ensure that they are
running. If you want to use the security subsystem of the NonStop NET/MASTER MS
system, remove the security exits from the configuration file. Use the SHUTDOWN
command to shut down the NonStop NET/MASTER MS system. Once the shutdown
is complete, the NonStop NET/MASTER MS system must be restarted to reestablish
the security environment.
NNM0751 THERE ARE DIFFERENT TYPES OF SECURITY EXITS
Cause. The configuration file contains more than one security exit. When the NonStop
NET/MASTER MS system attempted to access the exits, they were found to be of
different types. Security exits must be of the same type.
Effect. The error occurs during system initialization. The NonStop NET/MASTER MS
system terminates.
Recovery. Ensure that the security exits in the configuration file are of the same type.