NET/MASTER Messages Manual

NNM0815
Messages
2–168 106159 Tandem Computers Incorporated
NNM0815 EMS DISTRIBUTOR CONFIGURATION ERROR= ems_error , FILE
ERROR= errno , LOGFILE logname
Cause. An EMSDIST START command was issued, but the EMSDISTCOLL system
parameter contains an event log file name; or a SYSPARMS EMSDISTCOLL command
was issued with an event log file name while the NonStop NET/MASTER MS
distributor interface was active, but the distributor could not access the file.
ems_error is the EMS distributor error number.
errno is the Guardian file-system error number.
logname is the name of the event log file.
Effect. The distributor interface is stopped and flagged as unavailable for use.
Recovery. Use the error numbers to determine the appropriate action to take. After
you have rectified the problem, use the EMSDIST START command to restart the
interface.
NNM0816 DISTRIBUTOR FILTER ALTERED FROM filtname1 TO filtname2
Cause. A SYSPARMS EMSDISTFLT=filtname2 was issued, and the NonStop
NET/MASTER MS distributor interface switched the filters successfully.
filtname1 is the name of the old filter.
filtname2 is the name of the new filter.
Effect. Events are processed through the new filter.
Recovery. This message is informational only; no recovery action is necessary.
NNM0817 DISTRIBUTOR FILTER SET TO DEFAULT
Cause. A SYSPARMS EMSDISTFLT=FLUSH command set the distributor filter to the
default. Messages now pass through the default filter (that is, with no filtering) to the
NonStop NET/MASTER MS distributor interface.
Effect. Events are processed through the default filter.
Recovery. This message is informational only; no recovery action is necessary.