NET/MASTER Messages Manual

NNM0820
Messages
106159 Tandem Computers Incorporated 2–169
NNM0818 DISTRIBUTOR STARTED AS process_name
Cause. An EMSDIST START command was issued, and the event distributor named in
the EMSDISTPFN system parameter was started successfully.
process_name is the name of the distributor process.
Effect. The NonStop NET/MASTER MS distributor interface can now receive EMS
events.
Recovery. This message is informational only; no recovery action is necessary.
NNM0819 DISTRIBUTOR COLLECTOR ALTERED TO collname
Cause. A SYSPARMS EMSDISTCOLL was issued while the NonStop NET/MASTER
MS distributor interface was active. The distributor interface changed the distributor's
collector name to match the name in the EMSDISTCOLL system parameter.
collname is the name of the collector.
Effect. The distributor interface now receives events from the new collector.
Recovery. This message is informational only; no recovery action is necessary.
NNM0820 ERROR ON FILTER SWITCH. ERROR ems_error , FILTER filtname
Cause. A SYSPARMS EMSDISTFLT=filtname command was issued. The event
distributor tried to switch filters but encountered an error.
ems_error is the EMS distributor error number.
filtname is the name of the filter to switch to.
Effect. The EMS subsystem continues to use the filter that was used before the error
occurred.
Recovery. Use the error number to determine the appropriate action to take. After you
have rectified the problem, retry the command.