NET/MASTER Messages Manual

NNM0835
Messages
106159 Tandem Computers Incorporated 2–173
NNM0834 EMS DISTRIBUTOR CONFIGURATION ERROR= ems_error , REASON
CODE= reason , FILE filename , COLLECTOR= collname
Cause. An EMSDIST START command was issued but the distributor was started with
a collector specified in the EMSDISTCOLL system parameter. The collector found an
invalid log file.
ems_error is the EMS distributor error number.
reason is the reason code for ems_error .
filename is the name of the file in error.
collname is the name of the collector used by the distributor for events.
Effect. The NonStop NET/MASTER MS distributor interface is stopped and flagged as
unavailable for use.
Recovery. Use the error number and reason code to determine the appropriate action
to take. After you have corrected the problem, use the EMSDIST START command to
restart the interface.
NNM0835 ERROR errno ON EVENTTD FILE filename
Cause. An error occurred during an attempt to open the EMS events help file by the
SYSPARMS EMSENEVTTD system parameter or when you asked for help on an EMS
event message.
errno is the file-system error number, indicating the cause of the error.
filename identifies the file accessed.
Effect. If the error occurs while processing a SYSPARMS EMSEVENTTD command,
the EMSEVENTTD system parameter retains the old value and the specified EMS
events help file is not opened. If the error occurs when you ask for help on an event
message, no help is retrieved.
Recovery. Use the error number to determine the appropriate action to take.
If the error occurs while processing a SYSPARMS EMSEVENTTD command, reissue
the command.
If the error occurs when you asked for help on an event message, repeat the request.