NET/MASTER Messages Manual

NNM0864
Messages
106159 Tandem Computers Incorporated 2–177
NNM0860 UNABLE TO ROUTE COMMAND, linkname NOT CONNECTED
Cause. A ROUTE command was issued but the specified INMC link is inactive.
Effect. The specified command string is not routed to the remote system.
Recovery. Wait for the link to become active. You can either use the SHOW LINK
command to ensure that the link has become active or issue a SIGNON command and
wait for its completion, then retry the ROUTE command.
NNM0861 ROUTE COMMAND SPECIFIES INVALID LINK NAME linkname
Cause. A ROUTE command was issued but the specified INMC link name was invalid.
linkname is the name specified for the link.
Effect. The specified command string is not routed to the remote system.
Recovery. Use the SHOW LINK command to list the link names. Specify the correct
link name and retry the ROUTE command.
NNM0863 DESTINATION NAME linkname EXCEEDS MAXIMUM LENGTH OF 12
Cause. A SIGNON command was issued but the specified INMC link name exceeded
the maximum length allowed. A link name must not be more than 12 characters long.
linkname is the name of the link to the remote system where signon is required.
Effect. The signon is not processed.
Recovery. Use the SHOW LINK command to list the link names. Specify the correct
link name and retry the command.
NNM0864 DESTINATION NAME OMITTED
Cause. A SIGNOFF command was issued but no INMC link name was specified.
Effect. The signoff is not processed.
Recovery. Use the SHOW USERS command to find out which link you are using for
your remote session. Specify the correct link name and retry the command.