NET/MASTER Messages Manual

NNM1200
Messages
106159 Tandem Computers Incorporated 2–229
NNM1103 OPENED TERMINAL logitermname devname
Cause. The system retried the OPENTERM command and opened the terminal
successfully.
logitermname is the logical name of the terminal opened.
devname is the device name of the terminal opened.
Effect. The NonStop NET/MASTER logon panel is displayed on the opened terminal.
Recovery. This message is informational only; no recovery action is necessary.
NNM1104 INCORRECT SPLIT COORDINATES
Cause. A SPLIT command was issued, but an incorrect column or row was specified.
The size of a window cannot be fewer than eight columns or five rows.
Effect. The display is not affected.
Recovery. In your SPLIT command, ensure that the value of the COL operand is 9
through the width of your screen, minus 8, and the value of the ROW operand is 6
through the depth of your screen, minus 5. Retry the command.
NNM1200 INVALID TERMINAL NAME
Cause. A CLOSTERM, OPENTERM, SHOW TERM, or TERMINAL command was
issued with an invalid terminal name. The logical terminal name must be one through
eight characters long and cannot begin with a \ or a $.
Effect. The command is ignored.
Recovery. Use the SHOW TERMDEF=ALL command to list the logical and device
names of the terminals. Specify the correct terminal name and retry the command.