NET/MASTER Messages Manual

NNM1201
Messages
2–230 106159 Tandem Computers Incorporated
NNM1201 termname IS NOT KNOWN
Cause. A CLOSTERM, OPENTERM, SHOW SESS, or SHOW TERM command was
issued for a terminal that is not known to the system.
termname is either the logical name or the device name of the terminal.
Effect. The command is ignored.
Recovery. Use the SHOW TERMDEF=ALL command to list the logical and device
names of the terminals. Specify the correct terminal name and retry the command.
If the list does not include the required terminal, use the TERMINAL ADD command
to define the terminal to the system, then retry the command.
NNM1202 NO TERMINAL NAMES MEET GENERIC MASK CRITERIA OF termmask
Cause. A SHOW SESS, SHOW TERM, or TERMINAL DELETE command was issued
using a mask (a name ending in an *) to specify the terminals. However, there are no
names that match the mask.
termmask is the specified mask.
Effect. The command is ignored.
Recovery. Use the SHOW SESS=ALL, SHOW TERM=ALL, or SHOW TERMDEF=ALL
command to list the logical and device names of the terminals. Specify a correct mask
and retry the command.
NNM1203 NO CONNECTED TERMINAL NAMES MEET GENERIC MASK CRITERIA OF
termmask
Cause. A SHOW TERM=termmask was issued but failed to find a connected terminal
with a matching logical or device name.
termmask is the specified mask (a name ending in *).
Effect. The command is ignored.
Recovery. Use the SHOW SESS=ALL, SHOW TERM=ALL, or SHOW TERMDEF=ALL
command to list the logical and device names of the terminals. Specify a correct mask
and retry the command.