NET/MASTER Messages Manual

NNM1209
Messages
106159 Tandem Computers Incorporated 2–233
NNM1207 CONNECTED TERMINAL logitermname devname
Cause. An OPENTERM command was issued and the terminal was successfully
connected to the NonStop NET/MASTER MS system.
logitermname is the logical name of the terminal connected.
devname is the device name of the terminal connected.
Effect. The terminal can now be used for NonStop NET/MASTER MS sessions.
Recovery. This message is informational only; no recovery action is necessary.
NNM1208 PENDING CONNECTION TERMINAL logitermname devname
Cause. An OPENTERM command was issued for a terminal but the terminal was
waiting for physical connection (for example, a modem line that is waiting for an
incoming call).
logitermname is the logical name of the terminal to be opened.
devname is the device name of the terminal to be opened.
Effect. The OPENTERM command will be processed as soon as the terminal is
physically connected.
Recovery. Ensure that the terminal is physically connected to the system. Use the
SHOW TERMDEF command to check the connection status of the terminal.
NNM1209 OPENTERM FAILED FOR logitermname devname errtext
Cause. An OPENTERM command was issued for a terminal but failed to open the
terminal.
logitermname is the logical name of the terminal specified.
devname is the device name of the terminal specified.
errtext is one of the following:
CLOSTERM COMMAND
Either there was a CLOSTERM command for the terminal or the NonStop
NET/MASTER MS system is shutting down. If necessary, check who else has
modified the status of the specified terminal.
ERROR= nnn [ SNASENSE= xxxxxxxx ]
nnn is the Guardian file-system error number.
xxxxxxxx is the SNA sense code (for IBM 3270 terminals only).
Use the error number and the sense code to determine the actions to take.