NET/MASTER Messages Manual

NNM1219
Messages
106159 Tandem Computers Incorporated 2–239
STATUS is the heading for the status of the terminal. For the SHOW SESS and
SHOW TERM commands, the status is one of the following:
IN SESSION indicates that a user is logged on.
SUSPENDED indicates that a user is using the PROGRUN command.
WAIT LOGON indicates that the terminal is waiting for a user to
log on.
For the SHOW TERMDEF command, the status is one of the following:
CONNECTED indicates that the terminal is connected to NonStop
NET/MASTER MS.
DISCON'D indicates that the terminal is not connected to NonStop
NET/MASTER MS.
PEND_CONN indicates that the connection of the terminal to
NonStop NET/MASTER MS is in progress.
Effect. The headings are displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM1218 termname ALREADY DISCONNECTED
Cause. A CLOSTERM command was issued to disconnect a terminal but the terminal
was not connected to the NonStop NET/MASTER MS system.
termname is either the logical or the device name of the terminal.
Effect. The command is ignored.
Recovery. This message is informational only; no recovery action is necessary.
NNM1219 logitermname devname DEFINED
Cause. A TERMINAL ADD command was issued, and the terminal was defined to the
NonStop NET/MASTER MS system successfully.
logitermname is the logical name of the terminal added.
devname is the device name of the terminal added.
Effect. The terminal is now known to the NonStop NET/MASTER MS system.
Recovery. This message is informational only; no recovery action is necessary.