NET/MASTER Messages Manual

NNM1226
Messages
2–242 106159 Tandem Computers Incorporated
applstat is the status of the terminal. The status is one of the following:
CONNECTED indicates that the terminal is connected to
NonStop NET/MASTER MS.
DISCON'D indicates that the terminal is not connected to
NonStop NET/MASTER MS.
PEND_CONN indicates that the connection of the terminal to
NonStop NET/MASTER MS is in progress.
Effect. The information is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM1226 NO TERMINALS DEFINED
Cause. A SHOW TERMDEF command was issued but there were no terminals in the
NonStop NET/MASTER MS system. The command may be issued, for example, by a
remote user or by a virtual user.
Effect. No defined terminals are found.
Recovery. This message is informational only; no recovery action is necessary.
NNM1227 NEW LOGO TITLE SET
Cause. An LTITLE command was issued setting a new title for display at the top of the
NonStop NET/MASTER MS logon panel.
Effect. The new title becomes effective immediately. A new logon panel will now use
the new title. However, there are no updates to existing logon panels.
Recovery. This message is informational only; no recovery action is necessary.
NNM1228 TITLE IS TOO LONG
Cause. An LTITLE command was issued with a title that is more than 70 characters
long. A title cannot contain more than 70 characters.
Effect. The new title is not set.
Recovery. Specify a title with no more than 70 characters and retry the command.