NET/MASTER Messages Manual

NNM0037
Messages
2–14 106159 Tandem Computers Incorporated
NNM0037 TRACE COLLECTOR ERROR= errno , PROCESS= process_name
Cause. An error occurred in the trace collector process.
errno is the Guardian file-system error number.
process_name is the name of the trace collector process.
Effect. The trace collector is stopped.
Recovery. Use the error number to determine the appropriate action to take. After you
have corrected the problem, issue the TRACE command to set up your trace settings,
then issue the TRACE START command to restart the trace.
NNM0038 TRACE COLLECTOR process_name STOPPED, TRACE ID= trace_id ,
USER= userid
Cause. A TRACE STOP command was issued and the trace collector named in the
message is no longer available to collect trace data.
process_name is the name of the trace collector process.
trace_id is the unique trace ID of this trace collector.
userid is the name of the user who issued the TRACE START
command.
Effect. The trace collector no longer collects trace data.
Recovery. This message is informational only; no recovery action is necessary.
NNM0039 TRACE COLLECTOR process_name NOT ALTERED. NO TRACE POINTS
DECLARED
Cause. A TRACE ALTER command was issued but a trace collector cannot be altered
because a TRACE command was not issued beforehand to specify the trace settings.
Effect. The command is ignored.
Recovery. Issue the TRACE command using the following operands to specify the type
of messages to trace: CNM, EMS, INT, LOG, MSG, or INTERNAL. Then reissue the
TRACE ALTER command.