NET/MASTER Messages Manual

NNM1399
Messages
2–268 106159 Tandem Computers Incorporated
NNM1399 NOTIFY: PANEL EVENT: event OBJECT: panel
Cause. An event occurred in an asynchronous panel.
event is the type of event:
CHANGE indicates that the size of the displayed panel changed.
INPUT indicates that an input to the panel has occurred.
TAKEOVER indicates that another panel has taken over the display
area.
panel is the name of the panel.
Effect. The event is displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM1400 process_name ABENDING AT P=% paddr , TRAP= trapid , filename
[ line . fract ]
Cause. An internal check in a Global Memory Manager (GMM) process failed causing
the GMM process to abend. The message includes useful information to help your
Tandem support representative to identify the problem:
process_name is the name of the failed GMM process.
paddr is the memory address of the code that failed.
trapid is an ID to help your Tandem support representative to identify
the problem.
filename is the file name of the source code that caused the problem.
line.fract is the line number within the source file where the problem
occurred.
Effect. The backup of the failed GMM process takes over, and the NonStop
NET/MASTER MS system continues normal operation. If a backup does not exist,
NonStop NET/MASTER MS stops.
Recovery. Contact the Tandem support representative, and provide the following
information:
Displayed message
Abend dump file
Activity log and EMS log that contain the events leading up to the failure of the
GMM process