NET/MASTER Messages Manual

NNM1461
Messages
106159 Tandem Computers Incorporated 2–273
NNM1459 PROCESS process_name CREATED FOR objfile
Cause. A PROGRUN command was issued, and Guardian services created a process
for the program.
process_name is the name of the process.
objfile is the name of the program specified for PROGRUN.
Effect. The specified program is now executing.
Recovery. This message is informational only; no recovery action is necessary.
NNM1460 PROCESS process_name FOR objfile stop_reason
Cause. The process for the program stopped or abended.
process_name is the name of the process.
objfile is the name of the program.
stop_reason is STOPPED or ABENDED.
Effect. The program is terminated.
Recovery. If the program was terminated abnormally, other messages may appear that
provide further information about the problem. Use those messages to determine the
appropriate action to take.
NNM1461 NO DSNM CI COMMAND SERVER IS AVAILABLE TO PROCESS COMMAND
Cause. The user issued an OPSYS command but no DSNM CI processes (CIP) were
available.
Effect. The command is ignored.
Recovery. Use the SHOW PARAM command to check if a CIP parameter exists. If
there are no CIP parameters, then the OPSYS command cannot specify the following
operands: ANSWER, BREAK, CLEANUP, EOF, KILL, and SEND. If it is necessary to
have CIP servers, ask your system manager to include the CIP parameter in the
configuration and restart the system.