NET/MASTER Messages Manual

NNM1506
Messages
106159 Tandem Computers Incorporated 2–279
NNM1506 logical-name status starttime stoptime userid
Cause. A SHOW LOGS command was issued, and the message is part of the response.
The line contains information about a log file.
logical-name is the logical name of the log file: LOG1 through LOG9.
status is the status of the file. The status is one of the following:
AVAIL indicates that the file is available for use.
IN USE indicates that the file is in use.
SWAPPED indicates that the file has been swapped.
starttime is the date and time the file was opened. starttime is blank if
the status is AVAIL. If starttime is blank or contains hyphens
(-), and the status is SWAPPED, an error occurred and the file was
not opened.
stoptime is the date and time the file was closed. stoptime is blank if the
status is AVAIL. If stoptime is blank or contains hyphens (-),
and the status is SWAPPED, an error occurred and the file was not
opened.
userid is the ID of the user that issued the LOGSWAP command. The
ID is IO-ERROR if the log is swapped due to an IO error or
because the file filled up.
Effect. The information is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary. If an
error is indicated, refer to the activity log for the message that gives further
information about the error (for example, NNM1504, NNM1507, or NNM1510).