NET/MASTER Messages Manual

NNM1552
Messages
106159 Tandem Computers Incorporated 2–293
NO FUNCTION KEY RETURNED
The NonStop NET/MASTER MS system received an invalid function key value
from the terminal. The condition may occur when a TACL program (or some
other program) competes with the NonStop NET/MASTER MS system for access
to the terminal. Ensure that:
Any TACL or COMINT program running on the terminal is paused
No other programs are accessing the terminal
There are no faults with the physical connection of the terminal
OUT OF MEMORY
A NonStop NET/MASTER MS process has detected an out-of-memory condition.
Try to recover disk space from the swap volume. If the condition persists, contact
the Tandem support representative, and provide the following information:
SWAP parameter (see the TACL RUN command) used when initializing the
NonStop NET/MASTER MS system and the amount of available disk space
on the swap volume (use the TACL command DSAP $volume, SHORT)
NCL applications that were running in the NonStop NET/MASTER MS
process
Frequency of the out-of-memory condition
Possible relationships between any application that has been run in the past
and the out-of-memory condition
Time when the system was last initialized
PROCESS/FILE NAME INVALID
An invalid process name or file name was specified. Specify the correct process
name or file name and retry the command.
TOO MANY LOGONS FOR THIS USERID
The user had too many logons to the NonStop NET/MASTER MS system. The
system manager can give the user authority to log on to the system more than
once.
SECURITY CHECK FAILED
The security subsystem of the NonStop NET/MASTER MS system did not
authorize your request to log on. Your user ID, password, or both were invalid, or
you have no authority to use this terminal. Refer the message to your security
administrator.
SYSTEM IS NOT YET READY
The NonStop NET/MASTER MS system has not completed initialization, and it
rejected the logon request. Log on to the system again later.
SYSTEM IS SHUTTING DOWN
The system is shutting down; it rejected your logon request.
TERM BUF SIZE EXCEEDED
The terminal buffer became full while a panel was being displayed. A NonStop