NET/MASTER Messages Manual

NNM1553
Messages
2–294 106159 Tandem Computers Incorporated
NET/MASTER MS system uses an output buffer of about 4.1 KB (Tandem 6530
terminals) or 8 KB (IBM 3270 terminals) for panels. Reduce the number of fields in
the panel or disable color display to economize on the transferred data. If the
problem persists, the message indicates an internal error. Refer the message to
your system manager. The manager should contact the Tandem support
representative, providing the following information:
NCL procedure that caused the error
Definition file of the panel that caused the error
TIMEOUT
An input-output operation timed out on the terminal. The NonStop
NET/MASTER MS system uses a timeout period of 30 seconds for each terminal
operation. A timeout situation may indicate other problems. For example:
The terminal was turned off. Turn the terminal back on.
The physical connection between the terminal and the system has become
faulty. Check the connection and correct any faults.
The operating system was unable to service an input-output request within
the timeout period. Refer the message to your system manager.
INTERNAL PARAMETER/BUFFER ERROR
An internal error involving a bad parameter or buffer occurred. Contact the
Tandem support representative.
Effect. The logon attempt is not successful.
Recovery. Use the error number or the error text to determine the appropriate action to
take.
NNM1553 LOGON TO process_name FAILED: errtext
Cause. A request to the NonStop NET/MASTER MS process failed.
errtext is one of the following:
CLOSTERM COMMAND
There was a CLOSTERM command for the terminal, or the NonStop
NET/MASTER MS system is shutting down. If necessary, check who else has
modified the status of the specified terminal.
ERROR= nnn [ SNASENSE= xxxxxxxx ]
nnn is the Guardian file-system error number.
xxxxxxxx is the SNA sense code (for IBM 3270 terminals only).
Refer the message to your system manager. The manager can use the error
number and the sense code to determine the appropriate action to take.
INVALID TERMINAL DATA
The NonStop NET/MASTER MS system received invalid data from the terminal.