NET/MASTER Messages Manual

NNM1553
Messages
2–296 106159 Tandem Computers Incorporated
TOO MANY LOGONS FOR THIS USERID
The user had too many logons to the NonStop NET/MASTER MS system. The
system manager can give the user authority to log on to the system more than
once.
SECURITY CHECK FAILED
The security subsystem of the NonStop NET/MASTER MS system did not
authorize your request to log on. Your user ID, password, or both were invalid, or
you have no authority to use this terminal. Refer the message to your security
administrator.
SYSTEM IS NOT YET READY
The NonStop NET/MASTER MS system has not completed initialization, and it
rejected the logon request. Log on to the system again later.
SYSTEM IS SHUTTING DOWN
The system is shutting down; it rejected your logon request.
TERM BUF SIZE EXCEEDED
The terminal buffer became full while a panel was being displayed. A NonStop
NET/MASTER MS system uses an output buffer of about 4.1 KB (Tandem 6530
terminals) or 8 KB (IBM 3270 terminals) for panels. Reduce the number of fields in
the panel or disable color display to economize on the transferred data. If the
problem persists, the message indicates an internal error. Refer the message to
your system manager. The manager should contact the Tandem support
representative, providing the following information:
NCL procedure that caused the error
Definition file of the panel that caused the error
TIMEOUT
An input-output operation timed out on the terminal. The NonStop
NET/MASTER MS system uses a timeout period of 30 seconds for each terminal
operation. A timeout situation may indicate other problems: For example,
The terminal was turned off. Turn the terminal back on.
The physical connection between the terminal and the system has become
faulty. Check the connection and correct any faults.
The operating system was unable to service an input-output request within
the timeout period. Refer the message to your system manager.
INTERNAL PARAMETER/BUFFER ERROR
An internal error involving a bad parameter or buffer occurred. Contact the
Tandem support representative.
Effect. The logon attempt is not successful or the session failed.
Recovery. Use the error number or the error text to determine the appropriate action to
take.