NET/MASTER Messages Manual

NNM1712
Messages
2–314 106159 Tandem Computers Incorporated
NNM1712 MAXIMUM TIMER IDENTIFICATION IS maxtmrid CHARACTERS
Cause. An AT or EVERY command was issued but the user-assigned timer ID
exceeded 12 characters.
Effect. The command is not queued for execution.
Recovery. Specify a timer ID of not more 12 characters and retry the command.
NNM1713 THE SYSTEM ASSIGNED TIMER NUMBER IS FULL
Cause. An AT or EVERY command was issued but the NonStop NET/MASTER MS
system could not take on another timer command. The number of active timer
commands has reached the system maximum.
Effect. The command is not queued for execution.
Recovery. Refer the message to your system manager. The manager may need to
purge some timer commands.
NNM1714 HIGHER AUTHORITY LEVEL IS REQUIRED TO ROUTE TO ANOTHER USER
userid
Cause. An AT or EVERY command was issued, and the ROUTE operand was
specified, but the user did not have the authority to route the timer command to
another user.
Effect. The command is not queued for execution.
Recovery. If necessary, the system manager can increase the authority level.
NNM1715 NO REPEATED LIMIT WAS SPECIFIED
Cause. An EVERY command was issued, and a time interval of zero was specified, but
not an execution limit. A time interval of zero always requires an execution limit.
Effect. The command is not queued for execution.
Recovery. Use the LIMIT operand to specify the execution limit and retry the
command.