NET/MASTER Messages Manual

NNM1723
Messages
2–318 106159 Tandem Computers Incorporated
Recovery. This message is informational only; no recovery action is necessary.
NNM1723 NUMBER OF TIMER COMMANDS DISPLAYED WAS count
Cause. A SHOW TIMER command was issued. The message is part of the response,
and gives the number of timer commands in the NonStop NET/MASTER MS system.
Effect. The information is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM1724 NO ACTIVE TIMER COMMANDS FOR USER ID userid
Cause. A SHOW TIMER command (with the default value =OWN) was issued but no
timer commands belonging to the user were found.
Effect. No timer commands are displayed.
Recovery. If necessary, use the SHOW TIMER=ALL command to display all the timer
commands in the NonStop NET/MASTER MS system.
NNM1725 cmdmsg text_string
Cause. An AT or EVERY command was previously issued to execute some commands
or send a message at certain times. This message displays the command string or
message text at those times. The string or text wraps to a second line if the length
exceeds the display width.
cmdmsg is either CMD= or MSG=.
text_string is the command string or the message text.
Effect. The command string is executed or the message text is sent.
Recovery. This message is informational only; no recovery action is necessary.
NNM1730 TIMER COMMAND timer_number PURGED, EXECUTION LIMIT REACHED
Cause. The NonStop NET/MASTER MS system purged the timer command. The
command has been executed the number of times determined by the LIMIT operand.
timer_number is the system-assigned timer ID.
Effect. The timer command is purged.
Recovery. This message is informational only; no recovery action is necessary.