NET/MASTER Messages Manual

NNM1733
Messages
106159 Tandem Computers Incorporated 2–319
NNM1731 TIMER COMMAND timer_number PURGED, userid NOT AVAILABLE AS OCS
OPERATOR
Cause. The user exited from OCS causing the purge of a previously issued timer
command with no KEEP and ROUTE operands.
timer_number is the system-assigned ID of the command.
userid is the ID of the user controlling the command.
Effect. The timer command is purged.
Recovery. This message is informational only; no recovery action is necessary.
NNM1732 PURGE OPERAND opvalue IS INVALID OR OUT OF RANGE
Cause. A PURGE TIMER=opvalue command was issued but an invalid value was
specified for the operand. The valid values are OWN, ALL, the system-assigned timer
ID, or the user-assigned timer ID.
Effect. No timer commands are purged.
Recovery. Specify a correct value for the operand and retry the command.
NNM1733 TIMER COMMAND ID purge_timer_id DOES NOT EXIST
Cause. A PURGE TIMER command was issued but the specified timer ID did not exist.
purge_timer_id is the specified timer ID which can be either a system-assigned
timer ID or a user-assigned timer ID.
Effect. No timer command is purged.
Recovery. Use the SHOW TIMER command to list the timer IDs. The NonStop
NET/MASTER MS system may have already purged the timer command. If
necessary, use the correct ID and retry the PURGE command.