NET/MASTER Messages Manual

NNM2163
Messages
2–390 106159 Tandem Computers Incorporated
NNM2163 ONLY ALLOWED FOR PROGRUN UTILITY
Cause. The utility type was given as O but some entries were made in the PROGRUN
portion of the Utility Details panel.
Effect. The definition is not added or updated.
Recovery. Erase the entries in the PROGRUN portion of the panel, or correct the utility
type if it is incorrect.
NNM2164 PROMPT PATTERN NOT ALLOWED WITH OTHER PROMPT SPECIFICATION
Cause. The “Matching this pattern” field contains an entry, and at least one of the
“Length less than” and “Ending with” fields also contains an entry.
Effect. The definition is not added or updated.
Recovery. Either erase the entry in the “Matching this pattern” field, or erase the other
two fields.
NNM2165 INVALID CPU LIST
Cause. The CPUs field on page 2 of the Utility Details panel contains a nonnumeric
character, one of the numbers is larger than 15, or one of the numbers is repeated. If
supplied, the field should contain a space-separated list of CPU numbers in which the
utility is allowed to run.
Effect. The definition is not added or updated.
Recovery. Correct the CPU numbers and try again.
NNM2166 COMMAND SET IS ALREADY DEFINED
Cause. An attempt was made to create a command set definition under a name and
type for which there is already a definition.
Effect. The request is not performed.
Recovery. If the name or type was entered incorrectly, correct it and try again. If you
want to change the existing definition, use the Update option rather than the Add.