NET/MASTER Messages Manual

NNM2171
Messages
2–392 106159 Tandem Computers Incorporated
NNM2171 COMMAND ENTERED WITH NO AUTHORITY
Cause. A command name was entered without a corresponding authority level.
Effect. The definition is not added or updated.
Recovery. Either erase the command name or add the authority level and try again.
NNM2172 AUTHORITY ENTERED WITH NO COMMAND
Cause. An authority level was entered without a corresponding command name.
Effect. The definition is not added or updated.
Recovery. Either erase the authority level or add the command name and try again.
NNM2173 COMMAND AUTHORITY NOT SPECIFIED FOR utility < ucmd >
Cause. An OPSYS SEND command was issued for an undefined utility or a defined
utility with no command set entries, or a PROGRUN command was issued for an
undefined utility.
utility is the name of the utility.
ucmd is the name of the utility command (when present).
Effect. The command is not performed.
Recovery. If one of the names is misspelled, correct the spelling. If the names are
spelled correctly and there is a need to use that command or utility, ask your system
manager to add a definition for it.
NNM2174 SECCALL ERROR nn PREVENTED COMMAND AUTHORITY CHECK
Cause. The SECCALL verb failed to check the user's authority while attempting to
execute the OPSYS or PROGRUN command, and returned error code nn in
&SYS.RETCODE.
Effect. The OPSYS or PROGRUN command is not executed.
Recovery. Refer the message to your security administrator.