NET/MASTER Messages Manual

NNM2178
Messages
106159 Tandem Computers Incorporated 2–393
NNM2175 SECURITY EXIT ERROR message-id PREVENTED COMMAND AUTHORITY
CHECK
Cause. The security exit returned message-id when the OPSYS or PROGRUN NCL
procedure tried to check the user's authority to run the command.
message-id is the ID of the message that provides further information about
the error.
Effect. The OPSYS or PROGRUN command is not executed.
Recovery. Refer to the message identified by message-id to determine the action to
take.
NNM2176 THE DEFINITION CHANGED SINCE YOU READ IT
Cause. A record was changed by another user while you were in the process of
updating that record.
Effect. The update attempt is stopped, and the new contents of the record are
displayed, ready for another attempt at updating them.
Recovery. Reenter the changes you want to make and try updating again.
NNM2177 NETSTATUS/PROGRUN ERROR, PCHAR VALUE NOT FOUND
Cause. During an attempt to start NetStatus through PROGRUN, the value for the
PROCESSCHAR startup parameter was not found.
Effect. The attempt to start NetStatus is abandoned.
Recovery. Refer the message to your system manager. The manager may have to
restart the NonStop NET/MASTER MS system.
NNM2178 PRESS ENTER TO CONFIRM DELETES OR CANCEL KEY TO CANCEL DELETE
REQUESTS
Cause. One or more D action codes (delete item marked) were entered on the panel.
This message is requesting confirmation of those deletions.
Effect. The system waits for your confirmation.
Recovery. If you want the deletions to be performed, press the ENTER key. If you
want to cancel the deletions, press F12, the CANCEL key.