NET/MASTER Messages Manual

NNM2205
Messages
2–404 106159 Tandem Computers Incorporated
NNM2205 command COMMAND CAN BE EXECUTED FROM OCS COMMAND LINE ONLY
Cause. A command was issued but the attempt to execute the command failed. The
command must be entered from the OCS command line.
command is the name of the command that failed.
Effect. The command is rejected.
Recovery. Enter the command from an OCS command line.
NNM2206 command COMMAND IS NOT VALID FOR ENTRY FROM THIS SOURCE
Cause. A command was issued for execution in a non-OCS environment but it cannot
be executed in that environment: for example, a command was submitted to
background.
command is the name of the command that failed.
Effect. The command is rejected.
Recovery. Execute the command in an OCS environment.
NNM2208 text IS OUT OF RANGE, VALID RANGE IS lrange TO hrange
Cause. A command was issued but an out-of-range number was specified as an
operand.
text Describes the operand: for example, HOLD VALUE from a PROFILE
HOLD= command.
lrange is the low limit of the range that is valid for the operand.
hrange is the high limit of the range that is valid for the operand.
Effect. The command is rejected.
Recovery. Specify a number within the range and retry the command.