NET/MASTER Messages Manual

NNM0074
Messages
106159 Tandem Computers Incorporated 2–29
NNM0073 domain-id link-name system-id network-name nm-or-nnm
version-number os-version information-status
Cause. A SHOW DOMAINS command was issued, and the message is part of the
response. The line contains information about a domain.
domain-id is the domain ID of the remote system.
link-name is the name of the INMC link to the remote system.
system-id is the NonStop NET/MASTER MS or SOLVE ID of the
remote system.
network-name is the network name of the remote system.
nm-or-nnm is the VTAM version number of a remote SOLVE system
or the Tandem system name of a remote NonStop
NET/MASTER MS system.
version-number is the NonStop NET/MASTER MS or SOLVE version
number.
os-version is the operating system version on the remote system.
information-status is the status of the domain information as follows:
COMPLETE indicates current information.
INCOMPLETE indicates latest known information. The
link is not active and the domain
information might not be current.
Effect. The information is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0074 INMC LINK linkname NOT FOUND
Cause. A LINK or SHOW LINK command failed because the link name was not
known to the INMC subsystem. This could be because the link name specified has
been deleted by a LINK DELETE or a LINK RESET command.
linkname is the specified name of the INMC link.
Effect. The LINK command is ignored and no further action is taken.
Recovery. Use the SHOW LINKS=ALL command to display the names of all link
definitions known to the NonStop NET/MASTER MS system. Verify the name of the
link and try the LINK command again if required.