NET/MASTER Messages Manual

NNM0203
Messages
106159 Tandem Computers Incorporated 2–39
NNM0104 INMC LU0 NEGATIVE RSP, SENSE= sense1 sense2 , LINK= linkname
DEVICE= devname
Cause. A LINK START command was issued and the INMC software is attempting to
establish an LU-LU session with the remote system. The remote system has issued a
Negative Response message instead of a BIND message.
sense1 is one of two sense codes received.
sense2 is one of two sense codes received.
linkname is the name of the INMC link being started.
devname is the name of the device.
Effect. The link cannot be established this time. The INMC software will retry
continually until a session is established or until a LINK STOP or LINK RESET
command is issued.
Recovery. No recovery is required unless the problem is persistent. Sense code
descriptions are contained in the IBM documentation. Refer to the meaning of the
sense codes and determine what actions to take.
NNM0201 INVALID COMMAND ' command '
Cause. An invalid command was issued.
Effect. The command is rejected.
Recovery. Correct the command and retry.
NNM0202 MANDATORY ARGUMENT WAS MISSING
Cause. A command was issued but a mandatory operand was not specified.
Effect. The command is rejected.
Recovery. Add the missing operand and retry the command.
NNM0203 INVALID OPERAND ' operand '
Cause. A command was issued but an invalid operand was specified.
Effect. The command is rejected.
Recovery. Correct the operand and retry the command.