NET/MASTER Messages Manual

NNM0348
Messages
2–80 106159 Tandem Computers Incorporated
NNM0348 RESET NOT ALLOWED ON SECOND FILE OF UDB PAIR
Cause. A UDBCTL RESET command was issued on the second of a pair of UDB files.
You cannot purge the contents of the second file with this command.
Effect. The command is rejected.
Recovery. If it is absolutely necessary to carry out this task, check with the systems
administrator.
NNM0350 NO SUCH COMMAND FOUND
Cause. A !, ?, or FC command was issued but the specified command could not be
found in the command history buffer.
Effect. The command is ignored.
Recovery. This message is informational only; no recovery action is necessary. You can
use the HISTORY command to list the commands in the buffer.
NNM0351 NO COMMANDS CURRENTLY ON STACK
Cause. An FC or HISTORY command was issued but no commands could be found in
the command history buffer. Either the buffer was empty or the CMDSTACK profile
parameter has a value of 0.
Effect. The command is ignored.
Recovery. Use the PROFILE command to obtain the value of CMDSTACK. If it is 0,
issue the PROFILE CMDSTACK=n to set the retained number of commands in the
buffer to n. The valid range is 0 through 99.