NET/MASTER Messages Manual

NNM0360
Messages
106159 Tandem Computers Incorporated 2–83
NNM0359 ( cmdkeep ) text COMMAND WILL BE KEPT ON ENTRY LINE.
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the CMDKEEP operand. CMDKEEP specifies whether
the NonStop NET/MASTER MS system keeps or erases the command after you enter
it from the OCS command input line.
cmdkeep is the value of the operand.
text is part of the operand setting description.
The message text is one of the following:
(CMDKEEP=NO..) NO COMMAND WILL BE KEPT ON ENTRY LINE.
(CMDKEEP=YES.) LAST COMMAND WILL BE KEPT ON ENTRY LINE.
Effect. The information about CMDKEEP is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0360 ( cmdsep ) SEMI-COLONS ';' text RECOGNIZED AS COMMAND SEPARATORS
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the CMDSEP operand. CMDSEP specifies whether the
NonStop NET/MASTER MS system recognizes the semicolon as the command
concatenation character.
cmdsep is the value of the operand.
text is part of the operand setting description.
The message text is one of the following:
(CMDSEP=NO...) SEMI-COLONS ';' NOT RECOGNIZED AS COMMAND
SEPARATORS
(CMDSEP=YES..) SEMI-COLONS ';' RECOGNIZED AS COMMAND
SEPARATORS
Effect. The information about CMDSEP is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.