NET/MASTER Network Control Language (NCL) Programmer's Guide

Defining and Using Action Function Keys
Interaction With Users and Terminals
13–14 106160 Tandem Computers Incorporated
7. Observe the results immediately after pressing the SF1 function key, as shown in
the following screen:
(13:33) --------------------- OPERATOR CONTROL SERVICES ----------------------
FK SF1 ACT,ZEX1305N
NNM1861 SF1 KEY SET
SHOW PROCESS
_ NNM0555 PROCESS OCCURRENCE - NMMS_STATIC2 $I006 STATIC
NNM0999 *END*
-> 13:33:25 NNM0555 PROCESS OCCURRENCE - NMMS_STATIC2 $I006 STATIC
NNM1005 START ZEX1305N PROCESSING COMPLETE. NCLID 002018
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>
The terminal alarm sounds and a yellow blinking message is displayed.
8. Move the cursor to the OCS command input line and execute the K command to
clear the screen. Observe that the line beginning with -> now appears in the NRD
message display area, as shown in the following screen:
(13:34) --------------------- OPERATOR CONTROL SERVICES ----------------------
-> 13:33:25 NNM0555 PROCESS OCCURRENCE - NMMS_STATIC2 $I006 STATIC
=============================================================================
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>
You can use NRD cursor deletion to remove the NRD message when convenient.