NET/MASTER Network Control Language (NCL) Programmer's Guide

Defining Field Characters in a Panel Description File
Working With Panels
14–44 106160 Tandem Computers Incorporated
2. Type the following panel description file in your user panel library and call it
ZEX1408P:
#NOTE ZEX1408P
#NOTE Illustrates input justification and padding
#NOTE Underlining indicates length of each field
#FLD * TYPE=INPUT JUST=LEFT HLITE=USCORE CAPS=NO
#FLD $ TYPE=INPUT JUST=RIGHT HLITE=USCORE CAPS=NO
#FLD ^ TYPE=INPUT JUST=CENTRE HLITE=USCORE CAPS=NO
#FLD @ TYPE=INPUT JUST=LEFT PAD=0 HLITE=USCORE CAPS=NO
#FLD ? TYPE=INPUT JUST=RIGHT PAD=0 HLITE=USCORE CAPS=NO
#FLD / TYPE=INPUT JUST=CENTRE PAD=0 HLITE=USCORE CAPS=NO
#FLD ; TYPE=INPUT JUST=LEFT HLITE=USCORE
#FLD ' TYPE=INPUT JUST=RIGHT HLITE=USCORE
#FLD ` TYPE=INPUT JUST=CENTRE HLITE=USCORE
#FLD ( TYPE=INPUT JUST=LEFT PAD=1 HLITE=USCORE
#FLD ) TYPE=INPUT JUST=RIGHT PAD=1 HLITE=USCORE
#FLD | TYPE=INPUT JUST=CENTRE PAD=1 HLITE=USCORE
#FLD ~ TYPE=INPUT JUST=LEFT PAD=0 HLITE=USCORE
#FLD ! TYPE=INPUT JUST=RIGHT PAD=0 HLITE=USCORE
#FLD : TYPE=INPUT JUST=CENTRE PAD=0 HLITE=USCORE
%First output field _firstinputfield +Second output field+
*variable1+FIXED DATA
$variable2 +FIXED DATA
^variable3 +FIXED DATA
@variable4 +FIXED DATA
?variable5 +FIXED DATA
/variable6 +FIXED DATA
;variable7 +FIXED DATA
'variable8 +FIXED DATA
`variable9 +FIXED DATA
(variable10 +FIXED DATA
)variable11 +FIXED DATA
|variable12 +FIXED DATA
~variable13 +FIXED DATA
!variable14 +FIXED DATA
:variable15 +FIXED DATA
3. Execute the ZEX1408N NCL procedure from the OCS command input line using
the following START command:
START ZEX1408N