NET/MASTER Network Control Language (NCL) Programmer's Guide

Defining Field Characters in a Panel Description File

Working With Panels

106160 Tandem Computers Incorporated 14–45

4. Observe the results, as shown in the following screen:

First output field Second output field

John FIXED DATA

Janet FIXED DATA

Jack FIXED DATA

Jill00000000 FIXED DATA

00000000James FIXED DATA

Joyce000000000 FIXED DATA

1A1 FIXED DATA

1A1111111111111111 FIXED DATA

11111111111111111A1 FIXED DATA

1A111111111111111111 FIXED DATA

1A1000000000000000000 FIXED DATA

00000000000000000001A1 FIXED DATA

1A100000000000000000000 FIXED DATA

5. Press the ENTER key (not the F3 or F4 function key) to remove the panel from

display while leaving the values of the input variables unchanged and observe the

results of executing the NCL procedure, as shown in the following screens.

First, observe the pre-panel values of the input variables:

(07:19) --------------------- OPERATOR CONTROL SERVICES ----------------------

Pre-panel values are

John

Janet

Jack

Jill

James

Joyce

1A1

_____________________________________________________________________________

AUTO HOLD ------------------ NonStop NET/MASTER D30 ---------------- --------

M=>