NET/MASTER Network Control Language (NCL) Reference Manual

EMSCONT
Verbs
106126 Tandem Computers Incorporated 3–55
FLOW
specifies which subsystem is to process the message. If this operand is not
specified, and the remote system is an IBM system with CNM enabled, then the
CNM flow is used. If the remote system is a NonStop NET/MASTER MS system,
the flow is the same as the one on which the message was received. Table 3-2
gives the meaning of this operand.
Table 3-2. EMSCONT Flow Operand Description
Flow
CNM Licensed,
Configured, and Active Text is sent MDO is sent
Flow=CNM or
Flow=NEWS
Build NMVT and add
to MDO. If no CNM
vector exists and
remote not NonStop
NET/MASTER MS,
send NMVT through
ISR.
Not applicable If using NonStop
NET/MASTER MS with
Mapping Services support
Flow=PPO or
Flow=EMS
Not applicable If using NonStop
NET/MASTER MS
without Mapping
Services support
If using NonStop
NET/MASTER MS with
Mapping Services support
HLITE | HLIGHT= hlite-option
specifies which message highlight option to use.
BLINK
displays the message with the flashing, or “blink,” attribute.
REVERSE
displays the message with the reverse video attribute.
USCORE
displays the message with the underline attribute.
NONE
displays the message in the native display mode of the terminal.
INTENS
specifies the message display intensity to be used.
HIGH
specifies high intensity.