NET/MASTER Network Control Language (NCL) Reference Manual

New and Changed Information
iv 106126 Tandem Computers Incorporated
EMSCONT—The BKGCOLOR/BKGCOLOUR operand is new.
FILE ADD—The UDB identifier can refer to a UDB pair.
FILE CLOSE—The UDB identifier can refer to a UDB pair.
FILE DEL—The UDB identifier can refer to a UDB pair.
FILE GET—The PATH operand is new. The UDB identifier can refer to a UDB
pair.
FILE OPEN—The UDB identifier can refer to a UDB pair.
FILE PUT—The UDB identifier can refer to a UDB pair.
FILE SET—The UDB identifier can refer to a UDB pair.
INTCONT—The BKGCOLOR/BKGCOLOUR operand is new.
MSGCONT—The BKGCOLOR/BKGCOLOUR operand is new.
PANEL—The libraries through which NCL searches for panel description files has
changed. The considerations for this verb have been expanded to include the
panel return codes.
START—The RESTART operand is new.
SWGUID—Indicates that when used with no operands, the Guardian user ID for
the current user (under which the NCL process is running) becomes its default
value.
VARTABLE verbs—The SCOPE operand has two new values, CACHED and
G90PRC.
WRITE—The BKGCOLOR/BKGCOLOUR operand is new.
Section 5 System Variables
This section has additional information describing the following new system variables:
&SYS.CURS.FLD
&SYS.CURS.POS
&SYS.FILE.PATH
&SYS.PANEL.ERRORC
&SYS.PANEL.ERRORH
&SYS.PANEL.FKEYC
&SYS.PANEL.INPHIC
&SYS.PANEL.INPLOC
&SYS.PANEL.INPUTH
&SYS.PANEL.INPUTP
&SYS.PANEL.LABELC
&SYS.PANEL.OUTHIC
&SYS.PANEL.OUTLOC
&SYS.PANEL.SUBTLC
&SYS.PANEL.TITLEC
&SYS.PANEL.TITLEP