NET/MASTER Network Control Language (NCL) Reference Manual

&SYS.PANEL.LABELC
System Variables
106126 Tandem Computers Incorporated 5–81
&SYS.PANEL.LABELC The &SYS.PANEL.LABELC system variable contains the value specified with the
command SYSPARMS SPLABELC. This is the value for the operand COLOR in
specifying the display characteristics of field labels and comments on a panel. The
default value is GREEN.
&SYS.PANEL.LABELC
Considerations
A new value can be assigned to this variable only by using the command
SYSPARMS SPLABELC. See the example that follows.
An attempt to change this variable to an invalid color produces an error. Valid
values are BLUE, GREEN, PINK, RED, TURQUOISE, WHITE, and YELLOW.
See the panel statement #FLD in Section 6, “Panel Control Statements.”
See also the other system variables that relate to panels. They all begin with the
letters &SYS.PANEL.
Example
The following example displays the &SYS.PANEL.LABELC system variable and
shows how to change it. Initially it is GREEN; after the change it becomes BLUE:
PROC:PROCEDURE
SAY "&SYS.PANEL.LABELC = " &SYS.PANEL.LABELC
INTCMD "SYSPARMS SPLABELC=BLUE"
INTREAD
INTCONT
SAY "&SYS.PANEL.LABELC NOW = " &SYS.PANEL.LABELC
END PROC