NET/MASTER RMS Management and Operations Guide

Adding a Message Group Rule
Creating and Developing Rulesets and Rules
115415 NonStop NET/MASTER RMS Management and Operations Guide 5–55
Specifying the Message
Group Rule Actions
You can instruct RMS to perform specified actions when this rule is triggered (for
example, to automate tasks). You specify the actions using the RMS : System Action
panel (page 3 of the message group rule definition panels).
059
SDPL------------------------ RMS : System Action -------------------Page 3 of 3
Command ===>
ACTIONS (ANY combination may be entered)
Command Text ......
NCL Proc Name .....
Exec Cmd Group ....
Submit Actions ....
NCL Queue ...
Activate Timer ....
Load Ruleset ......
NCL Exit Name .....
You can set up the rule to instruct RMS to perform the following when a group of
messages trigger the rule:
Issue NonStop NET/MASTER MS commands
Start an NCL procedure
Issue NonStop NET/MASTER MS commands using a command group
Specify the background environment in which NonStop NET/MASTER MS
commands, NCL procedures, and NonStop NET/MASTER commands using a
command group can be executed.
Specify an NCL queue
Activate a timer by loading a time-based rule
Load another ruleset to replace this ruleset
Execute an exit NCL procedure to perform user-defined actions that are not
directly supported by RMS