NET/MASTER RMS Management and Operations Guide

Adding a Time-Based Rule
Creating and Developing Rulesets and Rules
5–66 115415 NonStop NET/MASTER RMS Management and Operations Guide
the range 00:00:00 through 23:59:59. You can omit the 00 strings. For example, ::01 is
the same as 00:00:01.
Specifying the Repeat Times
You can instruct the timer to repeat the rule actions at regular time intervals. Specify
the repeat interval in the Every field and the number of times to repeat in the Limit
field. The values, if specified, must conform to the following:
The value in the Every field must be between the value specified in the NonStop
NET/MASTER MS system parameter EVCMDMIN and 24:00:00 inclusive. (You
can omit the 00 strings. For example, ::01 is the same as 00:00:01.) Issue the
NonStop NET/MASTER MS SHOW SYSPARMS=EVCMDMIN command to
obtain the value of EVCMDMIN.
The value in the Limit field must be in the range 1 through 999.
Defining the User That Has
Control of the Time-Based
Rule Actions
Define the user that has control of the rule actions by specifying the user ID in the User
ID field on the RMS : Time-Based Rule Definition panel using one of the following
values:
Value Description
LOG Background Logger (always available). This is the default.
MON Background Monitor (always available).
SYS Background System Process (always available).
user ID ID of a user.
* User who specified this value.
069
Clock Settings (Activation and Frequency)
MON TUE WED THU FRI SAT SUN
On Days .....
Y Y Y Y Y Y Y
OR
On Date .....
(YY/MM/DD - Will be deleted from DB on expiry)
At .......... (HH:MM:SS - Activation time)
Every ....... (HH:MM:SS - Frequency)
Limit ....... (Execution limit)
User ID ..... LOG (Route User ID, MON, LOG, SYS or * (own user ID))
Note The rule actions are not performed if the specified user has not logged on to NonStop NET/MASTER MS
(that is, the user is not available) or if the user has no authority to perform those actions (for example, the
authority to issue a NonStop NET/MASTER MS command).