NET/MASTER RMS Management and Operations Guide

Transferring Rulesets Between RMS Databases
Updating and Maintaining Rulesets, Rules, and Command Groups
6–36 115415 NonStop NET/MASTER RMS Management and Operations Guide
2. Press ENTER to confirm the deletion. A ruleset is flagged as **DELETED** if the
operation is successful.
Transferring Rulesets
Between RMS
Databases
You can transfer a ruleset, and the records of the ruleset, from one RMS database to
another RMS database. When a ruleset is transferred, the source ruleset remains
unchanged. Records contained in the source ruleset (for example, a rule or the
environmental profile) are also transferred to the destination database.
For example, you can transfer records from a ruleset in Database A to a ruleset located
in the destination database, Database B.
When transferring a ruleset, both the source and destination RMS databases can be
active and can be located on either a local or a remote Tandem NonStop system.
Figure 6-10 shows the panels encountered when transferring rulesets.
Figure 6-10. Ruleset Transfer—Panel Hierarchy
NonStop NET/MASTER RMS
Primary Menu Panel Option 5
RMS : Ruleset
Transfer
Transfer
5
RMS : Ruleset
Maintenance
070
Transfer a ruleset as follows:
1. At any ===> prompt, type =R.5 and press ENTER to access Rule Maintenance.
The RMS : Ruleset Maintenance panel appears.