NET/MASTER RMS Management and Operations Guide

Transferring Rulesets Between RMS Databases
Updating and Maintaining Rulesets, Rules, and Command Groups
115415 NonStop NET/MASTER RMS Management and Operations Guide 6–37
2. Select option 5 to access Transfer Ruleset. Leave the Ruleset field blank for the
Transfer Ruleset option. The RMS : Ruleset Transfer panel appears.
SDPL-------------------- RMS : Ruleset Transfer -----------------------ZRMSRXIP
Command ===>
From RMS Database:
UDB File ID ..... (ZRMSDB = Current RMS Database)
or filename .....
Ruleset Name ....
To RMS Database:
UDB File ID ..... (ZRMSDB = Current RMS Database)
or filename .....
Ruleset Name .... (Blank = Source Ruleset Name)
Merge/Replace ... M (M/R)
Activation ...... D (I/D - Immediate/Deferred)
F1=Help F2=Split F3=Transfer F9=Swap F12=Cancel
3. Work your way through the panel, filling in the required fields. (See the following
subsections for a detailed description of the fields.) Use the following function
keys to move between the fields and to validate entries:
TAB and SHIFT TAB to move between the input fields
ENTER to validate your entries
4. Press F3 to transfer the ruleset to the destination database.
When the transfer has completed, a message is displayed on the RMS : Ruleset
Maintenance panel to confirm that the transfer has completed successfully.
You can also use the RMS XFER command from an OCS window or the ZRMSAPIN
( XFER ) procedure call from a user NCL procedure to transfer a ruleset. For more
information on using RMS commands and procedure calls, see Appendix B, “RMS
Commands,” and Appendix C, “RMS Procedure Calls,” respectively.