NET/MASTER RMS Management and Operations Guide

Printing Ruleset Reports
Updating and Maintaining Rulesets, Rules, and Command Groups
6–58 115415 NonStop NET/MASTER RMS Management and Operations Guide
Printing a Summarized
Report Using Criteria
Print a summarized report on rules and command groups that match specified criteria
as follows:
1. At any => prompt, type =R.5 and press ENTER to access Ruleset Maintenance.
The RMS : Ruleset Maintenance panel appears.
a. Specify the name of the ruleset that contains the rules and command groups
on which you want a report in the Ruleset field. If you wish to be prompted
by a selection list panel, ensure that the field is blank.
b. Select option 9 to access Ruleset Report Functions. If a selection list panel
appears, select the appropriate ruleset by typing an S next to the name of the
ruleset and pressing ENTER. The RMS : Ruleset Print Report panel appears.
The Ruleset field should contain the name of the ruleset that you have
selected.
Note The Ruleset field on the RMS : Ruleset Print Report panel can be modified. If you want to print a different
ruleset, change the name in the field.
2. Select option 3 to access Print Rules Matching Specified Search Criteria. The RMS :
Print Ruleset Selection panel appears.
SDPL------------------- RMS : Print Ruleset Selection -----------------ZRMSCATP
Command ===>
Enter required category types from ruleset BASERULE
Select category type:
S To select category type
X Indicates that this category type is unavailable for this option
Ruleset Control Options ...... X
Message Action Rules ......... ˚˚
Message Group Rules .......... ˚˚
Time-Based Rules ............. ˚˚
Command Groups ............... ˚˚
Ruleset Profile .............. X
Ruleset Function Key ......... X
Default Ruleset Allocation ... X
Spooler Location ... $S.#RMS˚˚˚˚˚˚˚˚˚˚
Number of Copies ... 1˚
F1=Help F2=Split F3=Exit F4=Return F9=Swap
a. Type S in the field for the type of records to be included in the report. You can
only select rules and command groups.
b. Type the name of the spooler location to receive the report in the Spooler
Location field. The default is $S.#RMS.