NET/MASTER RMS Management and Operations Guide

Testing Rules Against a Set of Messages
Testing Rules Using Simulated Events
115415 NonStop NET/MASTER RMS Management and Operations Guide 8–11
Modifying a Message Set You can modify a saved message set to simulate the message flow you require as
follows:
Add messages to the message set.
Modify messages in the message set.
Copy messages from or to another message set.
Delete messages from the message set.
You can then use your modified message set to test your ruleset. Figure 8-4 shows the
panels encountered when modifying a message set.
Select the message set you want to modify as follows:
1. At any => prompt, type =R.7 and press ENTER to access Edit Saved Message Set.
The RMS : Event Simulation panel appears.
2. Select option 5 to access Edit Saved Message Set (the Ruleset field is irrelevant).
The RMS : Captured Message Set Selection panel appears.
SDPL--------------- RMS : Captured Message Set Selection --------------ZRMSDBSP
Command ===> Scroll ===> CSR
S=Select A=Add D=Del C=Comment CP=Copy
Message Set Created Last Modified User ID
FRED 30-OCT-1994 NMTSR
HYMSGST1 31-OCT-1994 NMTHY
NEWFRED 30-OCT-1994 NMTSR
*END*
F1=Help F2=Split F3=Exit F4=Return F5=Comments F6=Refresh
F7=Backward F8=Forward F9=Swap