NET/MASTER RMS Management and Operations Guide

Controlling Message Handlers
Controlling Message Handlers and Rules
9–2 115415 NonStop NET/MASTER RMS Management and Operations Guide
Starting a Message Handler
by Using the RMS Panel
Interface
You can start message handlers by using the RMS panel interface. Figure 9-1 shows
the panels you encounter when starting a message handler by using the RMS panel
interface.
Start a message handler by using the RMS panel interface as follows:
1. Access the NonStop NET/MASTER RMS primary menu panel as follows:
If you want to start a message handler other than a MSGPROC or a message
handler in the current environment, type =R at any => prompt and press
ENTER to access RMS. The NonStop NET/MASTER RMS primary menu
panel appears.
SDPL---- NonStop NET/MASTER RMS T6583D30 - 31OCT94 : Primary Menu ----ZRMSMENP
Select Option ===>
1 - Start RMS Message Handler Userid NMTHY
2 - Active Message Handler Control Term HYLTRMNL
3 - Active RMS Timer Control Time 15:32:50
4 - Default Ruleset Allocation MON 31-OCT-1994
5 - Ruleset Maintenance
6 - Rule Maintenance
7 - Event Simulation
8 - Statistics Capture
9 - Message Action Control
X - Exit
F1=Help F2=Split F3=Exit F4=Return F9=Swap
If you want to start a message handler as a MSGPROC or in the current
environment using the RMS panel interface, you must first start the RMS
panel interface from the OCS window in which you want the message handler
to operate. Proceed as follows:
a. At any => prompt, type =2 and press ENTER to access Operator Control
Services. The OCS window appears.
b. At the command input line, type ZRMSMENN and press ENTER to start
the RMS panel interface. The NonStop NET/MASTER RMS primary
menu panel appears.