NET/MASTER RMS Management and Operations Guide

Controlling Message Action Rules
Controlling Message Handlers and Rules
115415 NonStop NET/MASTER RMS Management and Operations Guide 9–17
Note You can issue the REFRESH ON or REFRESH seconds command at the Command prompt on the
RMS : Message Action Queue panel to enable automatic refresh of the information on the panel.
2. Type the appropriate action codes next to the action to act on and press ENTER.
The action codes are as follows:
Use the action code S to obtain the detailed information on an action. The
RMS : Message Action Details panel appears and provides the following
information:
Field Description
Subject Identifies the subject on which the action acts.
Manager Identifies the manager of the subject.
Arrival Time Displays the arrival time of the message displayed in the Text field.
Text Displays the message that triggered the rule under Rule Details.
Ruleset Identifies the ruleset that contains the rule named in the Rule ID
field.
Rule ID Identifies the rule that invoked the action in the System Action field.
Msg-Handler NCLID Displays the NCL ID of the message handler that is responsible for
the action.
Rule-Action NCLID Displays the NCL ID of the NCL process that is processing or about
to process the action.
System Action Displays the action in the format type: text-string. If type is
COMMAND, text-string represents a NonStop NET/MASTER MS
command. If type is NCLPROC, text-string represents an NCL
procedure.
NCL Queue Displays the NCL queue in which the rule action is executing.
Region Displays the region in which the rule action is executing.
Action Status Identifies if the action is ACTIVE (currently executing), QUEUED
(queued in memory to the active subject queue), or DISK (queued
on disk to an NCL queue).