NET/MASTER RMS Management and Operations Guide

Controlling Message Action Rules
Controlling Message Handlers and Rules
115415 NonStop NET/MASTER RMS Management and Operations Guide 9–21
ZRMSAPIN ( THAW ) procedure call from a user NCL procedure to thaw a frozen
subject. For more information on using RMS commands and procedure calls, see
Appendix B, “RMS Commands,” and Appendix C, “RMS Procedure Calls,”
respectively.
Freezing a Message
Subject
You can freeze a subject so that when a message handler receives a message containing
that subject, the message cannot trigger any rules. The subject is one of the following:
Value of the subject pointed to by the
&$xxx.SPI.TANDEM.ZEMS_TKN_SUBJECT_MARK message profile variable (for
an event message).
ID of the message if the message does not contain a subject token (for a message
that is not an event message).
User-defined subject in a rule that overrides the previous two.
Note RMS stores a list of frozen subjects in its database. A frozen subject remains frozen even when you
restart the system.
Note When message suppression is defined in message action rules, suppression of the message will occur
regardless of whether the message triggering the rule contains a frozen subject.
Freeze a subject as follows:
1. At any => prompt, type =R.9 and press ENTER to access Message Action Control.
The RMS : Message Action Control panel appears.
SDPL--------------------- RMS : Message Action Control ----------------ZRMSMACP
Select Option ===>
1 - Display/Freeze/Delete Active Message Subjects
2 - Display/Thaw Frozen Message Subjects
3 - Freeze a Message Subject
4 - Display/Delete Delayed Message Actions
X - Exit
Subject .... ( Required 3 Optional 1 2 4 )
Manager .... ( Optional )
F1=Help F2=Split F3=Exit F4=Return F9=Swap