NET/MASTER RMS Management and Operations Guide

Controlling Message Action Rules
Controlling Message Handlers and Rules
115415 NonStop NET/MASTER RMS Management and Operations Guide 9–25
You can also use the RMS DISPLAY DELAYED command from an OCS window
or the ZRMSAPIN ( GETDELAYED ) procedure call from a user NCL procedure
to, respectively, display or retrieve limited information about delayed message
actions. For more information on using RMS commands and procedure calls, see
Appendix B, “RMS Commands,” and Appendix C, “RMS Procedure Calls,”
respectively.
Note You can issue the REFRESH ON or REFRESH seconds command at the Command prompt on the
RMS : Delayed Message Actions panel to enable automatic refresh of the information on the panel.
3. Type the appropriate action codes next to the delayed message action to act on and
press ENTER. The action codes are as follows:
Use the action code S to obtain the detailed information on an action. The
RMS : Delayed Message Actions panel appears and provides the following
information:
Field Description
Subject Identifies the subject on which the action acts.
Manager Identifies the manager of the subject.
Arrival Time Displays the arrival time of the message displayed in the Text field.
Text Displays the message that triggered the rule under Rule Details.
Ruleset Identifies the ruleset that contains the rule named in the Rule ID
field.
Rule ID Identifies the rule that invoked the action in the System Action field.
Rule-Action NCLID Displays the NCL ID of the NCL process that is processing or about
to process the action.
Retry Date/Time Displays the date and time at which the action will execute.
Delay Displays the requested delay for this retry.
Action NCL Proc Displays the first 26 characters of the text string pertaining to the
action being or to be performed.
NCL Queue Displays the NCL queue in which the rule action is executing.
Region Displays the region in which the rule action is executing.
Retry Message Displays the message specified by the action NCL procedure to
describe the reason for the failure.