NET/MASTER RMS Management and Operations Guide

RMS Message Variables
RMS Variables
108106 Tandem Computers Incorporated 11–5
Table 11-2. RMS Message Variables (Page 2 of 2)
Variable Description
&ZZZMSSID Contains the ID of the subsystem that generates the message and is
the value of the &$xxx.SPI.TANDEM.ZSPI_TKN_SSID (converted
event-message token ZSPI-TKN-SSID).
The following variables are visible to message action rules and message group rules, and their rule
action NCL procedures and command groups. For a message group rule, these variables relate to
the last message that causes the group rule to trigger.
&ZZZMSUBJECT Contains the subject (for example, a terminal) of the message and can
be one of the following:
Value of the subject pointed to by the
&$xxx.SPI.TANDEM.ZEMS_TKN_SUBJECT_MARK message
profile variable
ID of the message
User-defined
&ZZZMSUBJMARK Points to the subject and is the value of the
&$xxx.SPI.TANDEM.ZEMS_TKN_SUBJECT_MARK message profile
variable.
&ZZZMTIME Contains the time of message arrival. The value can be in the range
00:00:00 through 23:59:59.
The following variables are visible only to message group rules and their rule action NCL procedures
and command groups:
&ZZZMSGTEXT1 through
&ZZZMSGTEXT20
Contains the text of a message that triggers the message group rule.