NET/MASTER RMS Management and Operations Guide

RMS0313
RMS Messages
A–16 115415 NonStop NET/MASTER RMS Management and Operations Guide
RMS0313 record-count RECORDS READY TO BE PRINTED
Cause. You selected an option from your Ruleset Print Report panel and were printing
some records from the RMS database. The records were found and formatted for
printing. record-count is the number of formatted records that are ready to be sent
to the spooler for printing.
Effect. The records that you requested to be printed are ready to be sent to the spooler
for printing.
Recovery. This message is informational only; no recovery action is necessary. You can
either press F3 to send the formatted records to the spooler for printing, or press F12 to
cancel the request.
RMS1000 USER user-id NOT AUTHORIZED TO START MESSAGE HANDLERS
Cause. The NonStop NET/MASTER MS user user-id tried to start a message
handler but is not authorized to do so.
Effect. The message handler is not started.
Recovery. If this user needs to start a message handler, refer the problem to the security
administrator. The security administrator can update the customizable RMS NCL
procedure, ZRMSSECN, to give the user the necessary authorization.
RMS1003 OPTION CAN ONLY BE USED THROUGH OCS
Cause. You selected option M to start a message handler as a MSGPROC or option C
to start a message handler in the current environment from your Start Message
Handler panel. However, you entered this panel directly from the NonStop
NET/MASTER MS Primary Menu panel, rather than through OCS.
Effect. The message handler is not started.
Recovery. You must start a MSGPROC or a message handler in the current
environment through your OCS environment. Enter OCS from the NonStop
NET/MASTER MS Primary Menu panel. Enter the command string START
ZRMSMENN on the OCS command input line. When the RMS : Primary Menu panel
appears, select option 1 (Start RMS Message Handler). The Start Message Handler
panel appears. Use the appropriate option to start the message handler you want.