NET/MASTER RMS Management and Operations Guide

RMS6005
RMS Messages
115415 NonStop NET/MASTER RMS Management and Operations Guide A–65
Effect. The message handler loads the message action rule, but the rule is not saved in
the RMS database.
Recovery. This message is informational only; no recovery action is necessary.
RMS6001 TIMER INACTIVATED
Cause. You selected a time-based rule from your Active RMS Timers panel, changed
the value in the Status field on the Time-Based Rule Definition panel to INACTIVE,
and pressed F3 to save the change.
Effect. The timer based on the rule is inactivated. If you press F6 to refresh your
Active RMS Timers panel, the timer disappears.
Recovery. This message is informational only; no recovery action is necessary.
RMS6003 RULE ALREADY ACTIVE
Cause. You tried to activate a message action rule by typing an AC (ACt) action code
next to the rule on your Message Action Rules Maintenance selection list panel and
pressing ENTER. The rule is already active. The value in the Status column for this
rule is ACTIVE.
Effect. The status of the message action rule is not changed and the rule remains active.
Recovery. This message is informational only; no recovery action is necessary.
RMS6004 RULE ALREADY INACTIVE
Cause. You tried to inactivate a message action rule by typing an IN (INact) action
code next to the rule on your Message Action Rules Maintenance selection list panel
and pressing ENTER. The rule is already inactive. The value in the Status column for
this rule is INACTIVE.
Effect. The status of the message action rule is not changed and the rule remains
inactive.
Recovery. This message is informational only; no recovery action is necessary.
RMS6005 rms-record function-performed BUT NOT ACTIVATED
Cause. You added or modified a control options, profile, function key settings, or
time-based rule record in the RMS database through the Rule Maintenance option, and
saved the record with the Activation field set to the default D (Deferred).