NET/MASTER RMS Management and Operations Guide

RMS6038
RMS Messages
115415 NonStop NET/MASTER RMS Management and Operations Guide A–75
RMS6036 AT LEAST ONE DAY MUST BE SELECTED
Cause. You specified the value N in each of the On Days fields on your data entry
panel. This panel could be page 2 of the message action rule definition panels (the
second Message Validation panel) or the Time-Based Rule Definition panel. The action
you requested requires a value of Y in at least one of the On Days fields.
Effect. The value is not accepted. The action is not performed. The invalid values are
highlighted.
Recovery. Change at least one of the invalid values to Y (yes) before requesting the
action again. Deleting an invalid value and pressing ENTER puts the default value
Y (yes) in that field. If you are making entries on the Time-Based Rule Definition
panel, you can alternatively specify a date in the format yy/mm/dd (for example,
92/03/18 is March 18, 1992) in the On Date field and the values in the On Days fields
are ignored.
RMS6037 INVALID MESSAGE CODE
Cause. You specified an invalid value in the Msg Code field on your data entry panel.
This panel could be the Profile Definition panel, page 4 of the message action rule
definition panels (the Message Modification panel), or page 2 of the message group
rule definition panels (the Message Parameters panel).
Effect. The value is not accepted. The action is not performed.
Recovery. Change the invalid value to a valid message code before requesting the
action again. Valid message codes have the format xx, where xx is a hexadecimal
value in the range 00 through FF. If you do not want to change the message code,
ensure that the Msg Code field is blank.
RMS6038 COLOR MUST BE B(LUE),R(ED),P(INK),G(REEN),T(URQUOISE),Y(ELLOW)
OR W(HITE)
Cause. You specified an invalid value in the Color field on your data entry panel. This
panel could be page 4 of the message action rule definition panels (the Message
Modification panel) or page 2 of the message group rule definition panels (the
Message Parameters panel).
Effect. The value is not accepted. The action is not performed.
Recovery. Change the invalid value to one of B (blue), R (red), P (pink), G (green),
T (turquoise), Y (yellow), or W (white) before requesting the action again. If you do
not want to change the color, ensure that the Color field is blank.