NET/MASTER RMS Management and Operations Guide

RMS6113
RMS Messages
A–82 115415 NonStop NET/MASTER RMS Management and Operations Guide
Recovery. Change the invalid value to one of BEFORE (set the variables before any rule
actions are executed) or AFTER (set the variables after all rule actions are executed)
before requesting the action again.
RMS6113 DO ACTIONS MUST BE ENTERED
Cause. You specified values in the Threshold Maxcnt and Interval fields but no value
in the Do Actions field on page 4 of the message action rule definition panels (Message
Modification panel). You must specify the three fields together or none at all.
Effect. The action is not performed. The Do Actions field is highlighted.
Recovery. Specify how you want the message threshold to control the execution of the
rule actions before requesting the action again. Valid values are BEFORE (execute the
rule actions before the message threshold is reached), AFTER (execute the rule actions
after the message threshold is reached), or ALWAYS (always execute the rule actions).
RMS6115 SUPPRESSION COUNT MAXIMUM MUST BE ENTERED
Cause. You specified values in one or both of the Interval and Do Actions fields but no
value in the Maxcnt field on page 4 of the message action rule definition panels
(Message Modification panel). You must specify the three fields together or none at
all.
Effect. The action is not performed. The Maxcnt field is highlighted.
Recovery. Specify the number of messages that you want to deliver or suppress (as
defined through the Deliver field) within a time interval (defined in the Interval field)
in the Maxcnt field before requesting the action again. Valid values are in the range 1
through 999999. If you have not specified a value in either the Interval or Do Actions
field, you should also specify a value in that field.
RMS6117 SUPPRESSION COUNT INTERVAL MUST BE ENTERED
Cause. You specified values in one or both of the Maxcnt and Do Actions fields but no
value in the Interval field on page 4 of the message action rule definition panels
(Message Modification panel). You must specify the three fields together or none at
all.
Effect. The action is not performed. The Interval field is highlighted.