NET/MASTER RMS Management and Operations Guide

RMS6120
RMS Messages
115415 NonStop NET/MASTER RMS Management and Operations Guide A–83
Recovery. Specify the time interval within which messages below the message
threshold (defined in the Maxcnt field) are delivered or suppressed (as defined
through the Deliver field) in the Interval field before requesting the action again. The
value is in the format hh:mm:ss, and in the range 00:00:00 through 23:59:59. If you have
not specified a value in either the Maxcnt or Do Actions field, you should also specify
a value in that field.
RMS6118 MUST BE Y(ES), N(O), OR BLANK
Cause. You specified an invalid value in the Set Variables field on page 5 of the
message action rule definition panels (System Action panel). The action you requested
requires a valid value or blank in the Set Variables field.
Effect. The value is not accepted. The action is not performed.
Recovery. Change the invalid value to to one of Y, YES, N, or NO before requesting the
action again. If you do not need to set any ruleset variables in this rule, ensure that the
Set Variables field is blank.
RMS6119 EMBEDDED BLANKS ARE INVALID
Cause. You specified a value with embedded blanks in a field on your data entry panel
(for example, the Message ID field on page 1 of the message action rule definition
panels). Embedded blanks are blank characters between the first and last non-blank
characters of a value.
Effect. The value is not accepted. The action is not performed.
Recovery. Change the invalid value to one that does not contain embedded blanks
before requesting the action again.
RMS6120 PURGE TIME MUST BE ENTERED
Cause. You specified a value in one of the Message Group ID fields on page 5 of the
message action rule definition panels (System Action panel) but no value in the
corresponding Purge After field.
Effect. The action is not performed. The Purge After field is highlighted.
Recovery. Specify the time interval within which this message action rule, if triggered,
can be used to trigger the specified message group rule in the corresponding Purge
After field, before requesting the action again. Valid values are in the format hh:mm:ss,
and in the range 00:00:00 through 23:59:59.